118Error MessagesFor Fax advantage assistance, call 1-800-435-7329.ReportsIf your unit cannot send a fax, check the following.– The number you dialed is correct.– The other party’s machine is a facsimile.If the problem remains, correct it by following the communication message printed on the sending and journalreports (p. 67, 68).Communication message Error code Cause & RemedyCOMMUNICATION ERRORDOCUMENT JAMMEDERROR-NOT YOUR UNITMEMORY FULLNO DOCUMENTOTHER FAX NOT RESPONDPRESSED THE STOP KEYTHE COVER WAS OPENEDOK41–72FF—54, 5970——————l A transmission or reception error occurred. Try again or checkwith the other party.l The document is jammed. Remove the jammed document (p. 128).l A transmission or reception error occurred because of a problemwith the other party’s fax machine. Check with the other party.l The document was not received due to memory being full.l The document was not fed into the unit properly. Reinsert thedocument and try again.l The other party’s fax machine was busy or ran out of recordingpaper. Try again.l The document was not fed properly. Reinsert the document andtry again.l The other party’s fax machine rings too many times. To send afax manually, dial the number, confirm the fax tone, and press.l The other party’s machine is not a facsimile. Check with theother party.l The number you dialed is not in service.l was pressed and fax communication was canceled.l The cover was opened. Close it and try again.l Fax communication was successful.STOPSTART/SET/COPY
