78Receiving FaxesReceiving FaxesNote:l If you do not answer the call within 15 rings,the unit will temporarily activate the answeringdevice. The greeting message will then beplayed. If the remote operation ID (p. 108) isentered during the greeting message, the unitwill change to the TAD/FAX mode.TALKFAXOFFAUTO ANSWERTAD/FAX ONDIGITAL SP-PHONESTOPSTART/SET/COPYHandsetTo stop receiving the documentPress .Friendly reception featureWhen you answer a call and hear a fax calling tone(slow beep), the unit will automatically startreceiving.l If this feature is not required, set to “OFF” (p. 91).STOPMemory receptionWhen a printing problem is detected, the unit willtemporarily store the received document into memory.While document is in memory, the unit will:— display an error message and the followingmessage alternately.Display:— alert you with slow beeps (memory receptionalert).l Follow the instructions on pages 118 to 120 tosolve the problem and print the stored document.l For memory capacity, see page 141.FAX IN MEMORYTEL mode(answering all calls manually)If the AUTO ANSWER light is on, turn it off by pressing.Display: TEL MODEAUTO ANSWER1 When the unit rings, pressor lift the handset to answer the call.2 When:— document reception is required,— a fax calling tone (slow beep) is heard, or— no sound is heard,press .3 Replace the handset, if using it.l The unit will start reception.CONNECTING.....START/SET/COPYDIGITAL SP-PHONEReceiving fax with the main unit1 When the handset rings, press .2 When:— document reception is required,— a fax calling tone (slow beep) is heard, or— no sound is heard,press longer than 1 second.l The only way to stop receiving is by pressingon the main unit.STOPFAXTALKReceiving fax with the handset
