59Sending FaxesFax/CopyFACE DOWNSTOPSTART/SET/COPYREDIAL/PAUSERESOLUTIONDIGITAL SP-PHONEDocumentfeeder trayDocument guidesHandsetTo feed more than 15 pages at a timeInsert the first 15 pages of the document. Add theextra pages (up to 15) before the last page is fedinto the unit.To redial the last numberPress .l If the line is busy, the unit will automatically redialthe number up to 5 times.l During redial, the following will be displayed.Display:l To cancel redialing, press .To stop transmissionPress .To eject the document, press again.STOPSTOPSTOPWAITING REDIALREDIAL/PAUSETo select the resolutionSelect the desired resolution according to the typeof document.l Using the fine, super fine or half tone setting willincrease the transmission time.l If the resolution setting is changed duringfeeding, it will be effective from the next sheet.l The super fine resolution only works with othercompatible fax machines.STANDARDFINESUPER FINEHALF TONEFor printed or typewrittenoriginals with normal-sizedcharacters.For originals withsmall printing.For originals withminute printing.For originals containingphotographs, shadeddrawings, etc.Sending a fax manually1 Open the document feeder tray.2 Adjust the width of the document guides to the sizeof the document.3 Insert the document (up to 15 pages) FACE DOWNuntil a single beep is heard and the unit grabs thedocument.Display:4 If necessary, press repeatedly toselect the desired setting (see below).5 Press or lift the handset.(This step is optional. See note.)6 Dial the fax number.Example:7 When a fax tone is heard:Press , and replace thehandset if using it.ORWhen the other party answers your call:Ask them to press their start button. When a faxtone is heard, press andreplace the handset if using it.CONNECTING.....START/SET/COPYSTART/SET/COPYTEL=5678901TEL=DIGITAL SP-PHONERESOLUTIONSTANDARDNote:l If you cannot send a fax, confirm theproblem by printing a journal report (p. 134)and see page 118 to solve the problem.l Performing step 5 allows you to identify anypossible problems in sending a fax. For theparties with whom you have experienced noproblems, you can skip step 5. Dial the faxnumber and press .START/SET/COPY
