Initial Programming32 For Fax Advantage assistance, call 1-800-435-7329.Setting your logoThe logo can be your company, division orname.1 Press {{{{MENU}}}}.SYSTEM SET UPPRESS NAVI.[( )]2 Press {{{{<<<<}}}} or {{{{>>>>}}}} until the following isdisplayed.YOUR LOGOPRESS SET3 Press {{{{SET}}}}.LOGO=4 Enter your logo, up to 30 characters, usingthe dial keypad. See page 33 for details.Example: “BILL”1. Press {{{{2}}}} 2 times.L Cursor (|) will appear on the display.LOGO=|B2. Press {{{{4}}}} 3 times.LOGO=B|I3. Press {{{{5}}}} 3 times.LOGO=BI|L4. Press {{{{>>>>}}}} to move the cursor to thenext space and press {{{{5}}}} 3 times.LOGO=BIL|L5 Press {{{{SET}}}}.L The next feature will be displayed.6 Press {{{{MENU}}}}.Note:L You can enter your logo by pressing {{{{++++}}}} or{{{{----}}}} in step 4. In this case, press {{{{>>>>}}}} tomove the cursor (see page 33 for details).To change capital or lower-case lettersPressing the {{{{####}}}} key will change to capital orlower-case alternately.1. Press {{{{2}}}} 2 times.LOGO=|B2. Press {{{{4}}}} 3 times.LOGO=B|I3. Press {{{{####}}}}.LOGO=B|i4. Press {{{{5}}}} 3 times.LOGO=Bi|lTo correct a mistakePress {{{{<<<<}}}} or {{{{>>>>}}}} to move the cursor to theincorrect character, and make the correction.To delete a characterPress {{{{<<<<}}}} or {{{{>>>>}}}} to move the cursor to thecharacter you want to delete and press {{{{STOP}}}}.To insert a character1. Press {{{{<<<<}}}} or {{{{>>>>}}}} to move the cursor to theposition to the right of where you want toinsert the character.2. Press {{{{MUTE}}}} to insert a space and enterthe character.{SET}{MENU}{<}{>}{+}{-}{MUTE}(Insert){FLASH/CALL WAIT}(Hyphen){STOP}(Delete)
