Incoming Messages74Incoming MessagesListening to recorded messages using the baseunitWhen the unit has recorded new voicemessages:– The PLAY MESSAGES indicator will flash.– The display will show the total number ofrecorded messages.Example:02– Slow beeps will sound if the message alertfeature is activated (feature #42, page 90).Press {{{{PLAY MESSAGES}}}}.L Only the new recorded messages will beplayed.L Adjust the speaker volume using {{{{++++}}}} or{{{{----}}}}.L After playing back all of the new messages,the PLAY MESSAGES indicator will stopflashing but will remain lit up. If you press{{{{PLAY MESSAGES}}}} at this time, all therecorded messages will be played.To repeat a messagePress {{{{<<<<}}}} while listening to the message.L If you press {{{{<<<<}}}} within 5 seconds of thebeginning of the message, the previousmessage will be played.L To play back a specific message, press {{{{<<<<}}}}or {{{{>>>>}}}} and search for the message you wantto listen to.To skip a messagePress {{{{>>>>}}}} to play the next message.To stop playbackPress {{{{STOP}}}}.L If you press {{{{PLAY MESSAGES}}}} within 1minute, the unit will resume playing the restof the messages.Voice time/day stampDuring playback, a synthesized voice willannounce the time and day of the week thateach message was recorded.To change the playback speedPress {{{{QUICK}}}} to play messages at one and ahalf times the original speed. Press {{{{SLOW}}}} toplay messages at half the original speed.L To return to the original speed, press{{{{QUICK}}}} or {{{{SLOW}}}} again during quick orslow playback.{SET}{<}{>}{+}{-}{STOP}PLAY MESSAGESFLASH/LIGHT{ERASE}{QUICK}{SLOW}
