Error Messages93For Fax Advantage assistance, call 1-800-435-7329.HelpReportsIf your unit cannot send a fax, check the following:– The number you dialed is correct.– The other party’s machine is a fax machine.If the problem remains, correct it by following the communication message printed on the sending andjournal reports (page 56).COMMUNICATION ERROR(Code: 40-42, 46-72, FF)L A transmission or reception error occurred.Try again or check with the other party.COMMUNICATION ERROR(Code: 43, 44)L A line problem occurred. Connect thetelephone line cord to a different jack and tryagain.L An overseas transmission error occurred. Tryusing the overseas mode of feature #23(page 89).DOCUMENT JAMMEDL The document is jammed. Remove thejammed document (page 106).ERROR-NOT YOUR UNIT(Code: 54, 59, 70)A transmission or reception error occurredbecause of a problem with the other party’s faxmachine. Check with the other party.MEMORY FULLL The document was not received as a result ofthe memory being full.NO DOCUMENTL The document was not fed into the unitproperly. Reinsert the document and tryagain.OTHER FAX NOT RESPONDINGL The other party’s fax machine is busy or hasrun out of recording paper. Try again.L The document was not fed properly. Reinsertthe document and try again.L The other party’s fax machine rings too manytimes. Send the fax manually (page 55).L The other party’s machine is not a faxmachine. Check with the other party.L The number you dialed is not in service.PRESSED THE STOP KEYL {{{{STOP}}}} was pressed and faxcommunication was canceled.OKL Fax communication was successful.
