Panasonic KX-FPG391 Operating Instructions Manual

Also see for KX-FPG391 - Fax / Copier: Operating instructions Operating instructions

Contents

Panasonic KX-FPG391 Operating Instructions Manual Manual pdf 48 page image

3. Telephone46L After checking “×2” to “×9” will be replacedwith a “,”.To stop viewingPress {STOP} after step 2.To edit a telephone number before callingback/storingPress {*} repeatedly after step 2. Each timeyou press {*}, the telephone number will bechanged as follows:1 Local telephone number only (area codeomitted)2 Area code – Local telephone number3 1 – Area code – Local telephone number (“1”added)L To return a call, press {SP-PHONE}.L To store the number in the phone book, followfrom step 3 of the base unit storing procedureon page 48.Note:L The unit provides an auto edit feature forCaller ID numbers. For details, see page 46.3.10 Caller ID number autoedit featureOnce you call back an edited number, this unitcan automatically edit incoming phone numbersfrom the same area code each time you receivea call. For example, it can ignore the area code ofcalls originating from your area code, so that youcan call these numbers using caller informationwithout dialing the area code.To activate this feature, you must edit a callerinformation by selecting pattern 1, 2 or 3(page 45, 46), then make a call to that number.After that, calls from numbers in that area codewill be edited automatically. The handset andbase unit can remember up to 4 area codes eachto be edited according to patterns 1 and 2.When more than 5 area codes are edited, olderarea codes are reset to pattern 3. Phonenumbers from the 4 most recently edited areacodes will be automatically edited.This feature can be turned ON using either thehandset or the base unit. The default setting isON.3.10.1 Turning ON the Caller IDnumber auto edit featureL Keep the front cover page open for buttonlocations.With the handsetMake sure the handset is not being used.1 Press {MENU}.2 Scroll to “Initial setting” by pressing{v} or {e}, then press the soft key({SELECT}).3 Scroll to “Caller ID edit” by pressing{v} or {e}, then press the soft key({SELECT}).4 Press {v} or {e} to select “On”.5 Press the soft key ({SAVE}).6 Press {OFF}.With the base unit1 Press {MENU}.2 Press {#}, then {7}{5}.3 Press {A} or {B} repeatedly to select “ON”.4 Press {SET}.5 Press {MENU}.