1.3.60 Room Status ControlIn a hotel-type environment, an extension assigned as a hotel operator can check guests intoor out of rooms and confirm that the room is clean and ready for the next guest by changingthe room status of the corresponding extension. The hotel operator’s extension must haveflexible buttons assigned as Check-in, Check-out, and Cleaned-up buttons, and a DSS buttonfor each extension that will be used in a guest room.• The hotel operator must be using a 6-line display PT to use the Room Status Control features.• While in Room Status Control mode:a. The hotel operator’s extension can only check extensions in/out and ready/not ready. Allother operations will be ignored.b. The light of each DSS button shows the room status of the corresponding extension asfollows:Off: Checked-out and ReadyFlashing Red: Checked-out and Not ReadyRed on: Checked-in[Light Pattern Example: Checked-in Mode]Room101DSS buttonRoom102Room103Room104Room105Check-in buttonCheck-out buttonRooms 101 and 103are currently inchecked-in status.Cleaned-up buttonc. The lights of other buttons may not show their normal display.d. The hotel operator’s extension is considered to be busy. Callers to that extension willhear a busy tone.134 Operating Manual Document Version 2013-041.3.60 Room Status Control
