Panasonic KX-NT700 Operating Instructions Manual

Also see for VoiceSonic KX-NT700: Specifications Quick reference guide Operating instructions Quick reference guide Operating instructions

Contents

Panasonic KX-NT700 Operating Instructions Manual Manual pdf 36 page image

• Press the dial key corresponding to the desiredcharacter, then press [ ] or [ ] to scroll ifnecessary.• To exit the phonebook, press [MENU].3. When the desired entry is displayed, press [ ] or.Note• The line that was selected when the entry wasstored in the phonebook ("IP" or "TEL") isshown in the lower-right corner of the display.This line will be used when the entry is called.Example:The TEL line willbe used whenyou call thisnumber.• If the "Line Selection" setting is not set to"IP + TEL" (see page 33), TEL line numberscannot be called.Making Conference CallsWhile on a call, you can make another call and establisha conference call (i.e., a 3-party call) including yourselfand 2 other parties. You can establish a conference callusing the following types of calls.– 2 IP calls– 1 IP call and 1 TEL call– 1 IP call and 1 PS call– 1 IP call and 1 PC callTo establish a conference call when you receive a call,see page 38.Note• When "Panasonic PBX Compatibility" in"Protocol Settings" is set to "On", youcannot make a conference call using 2 IP linesin "IP-PBX" mode (see page 58).Conference calls using the IP and TEL lines1. PressCONF to put the current call on hold.2. Confirm that the desired line ("IP" or "TEL") isselected.• If the current call is an IP call, you can changethe selected line by pressing the left functionbutton ([F1]).The IP line is selected.The TEL line isselected.[F1] [F1]• If you cannot select the desired line, pressBACK, then change the "Line Selection"setting (see page 33). After you have changedthe setting, repeat this procedure from step 1.3. Call the party you want to add to the conversation.• You can end the second call and return to theoriginal call by pressingBACK .• To call a party stored in the phonebook, seepage 35.4. After the called party answers, pressCONF tobegin the conference call.• Before beginning the conference call, pressENDto end the second call and return to theoriginal call.36 Operating Instructions Document Version 2011/06Making and Answering Calls