Panasonic KX-NT700 Operating Instructions Manual

Also see for VoiceSonic KX-NT700: Specifications Quick reference guide Operating instructions Quick reference guide Operating instructions

Contents

Panasonic KX-NT700 Operating Instructions Manual Manual pdf 47 page image

Changing andConfirming SettingsSettings can be programmed and confirmed from thefront panel. To use Conferencing Phone Manager(found on the included CD-ROM) to program the unitfrom a computer, see the Operating Instructions forConferencing Phone Manager for more details.Changing SettingsUsing the Front Panel1. Press [MENU].2. Press [ ] or [ ] to select the desired programmingcategory, then pressSELECT .3. Press [ ] or [ ] to select the desired parameter,then pressSELECT .4. Adjust the settings as desired.• To cancel without changing any settings, press[MENU].5. PressSAVE .6. Press [MENU].Note• When programming the unit from the frontpanel, the current setting is indicated on thedisplay by "ü".• To return to the previous screen, press[BACK].• If you do not press any buttons for 1 minute, theunit will return to standby mode.• The following parameters cannot beprogrammed, and are therefore not displayed,when the unit is in use.– Operation Mode– Language– Date & Time– Time Format– Ringer Volume– Ringtone– IP Network Settings (all parameters)– Protocol Settings (all parameters)– VoIP Settings (all parameters)– QoS Settings (all parameters)Additionally, the following parameters cannotbe programmed, and are therefore notdisplayed, when the TEL, PS, or PC line is inuse.– Line Selection– TEL Settings (all parameters)Using Conferencing Phone ManagerTo use Conferencing Phone Manager (found on theincluded CD-ROM) to program the unit from acomputer, see the Operating Instructions forConferencing Phone Manager for more details.Restarting the UnitAfter changing the following parameters, the unit mustbe restarted in order for the new settings to take effect.(Data is not erased when the unit is restarted.)– Operation Mode (page 51)– IP Address Mode (page 54)– IP Address (page 55)– Subnet Mask (page 55)– Default Gateway (page 55)– SIP Ext. No. (page 55)– SIP Authentication ID (page 56)– SIP Password (page 56)– SIP User Domain Name (page 56)– SIP Proxy Server IP Address (page 56)– SIP Proxy Server Port Number (page 57)– SIP Registrar IP Address (page 57)– SIP Registrar Port Number (page 57)– Hold Method (page 57)– Panasonic PBX Compatibility (page 58)– SIP Signaling Port Number (page 58)– VLAN ID (page 59)– VLAN Priority (page 59)– SIP ToS Field (page 60)– RTP ToS Field (page 60)1. Press [MENU].2. Select "System Options", then pressSELECT .3. Select "Reboot", then pressSELECT .4. Select "Yes", then pressSELECT .Note• To use Conferencing Phone Manager to restartthe unit, see the Operating Instructions forConferencing Phone Manager for more details.• You can also restart the unit by turning it off andon again:– When using the AC adaptor: Disconnectthe AC adaptor from the AC outlet, thenconnect it again.Document Version 2011/06 Operating Instructions 47Programming the UnitProgramming the Unit