Panasonic KX-PS8000 Reference Manual

Also see for KX-PS8000: Operating instructions Setup manual Specifications Setup manual

Contents

135Error message Possible cause RecoveryUnable to print more thanone areaTroubleshootingDigital Duplicator UtilityCannot find scannerCheck the cable connection for thesystem. Close the Digital Duplicator Utilitywindow and turn off the system (scanner /printer / computer), then turn it on again.Scanner is not turned on or cableconnection is improper.Cannot find scanner andprinterSet the number of colors to 256 colors ormore.Scanner and printer are not turnedon or cable connection is improper.Cannot find printer.Zoom function is not available when usingthe ADF tray. Place the document on thescanner glass and retry it.Printer is not turned on or cableconnection is improper.Digital Duplicator Utilityrequires 256 colors orhigherTurn off the system (scanner / printer /computer), then turn it on again.The number of displayed colors onthe monitor is less than 256 bit.Cannot use more than100% zoom when usingADFCheck the connection and turn on thescanner and/or printer. Click Retry on themessage window.An image enlarged more than 100%is being printed using the ADF tray.No response fromscanner. Check the poweror cable. No responsefrom printer. Check thepower or cable.Remove the document from the ADF tray,place it on the scanner glass, then print.Scanner or printer is not turned onor cable connection is improper.DCIS did not startprinting. Abort printing.Delete the unnecessary images from theLayout box ( + P.64).DCIS did not start duplicating.Delete the unnecessary selection areasfrom the Original box ( + P.55).More than one selection area isprinted using the ADF tray.Exceed 30 areas. Deleteother areas and try again.More than 30 images are pasted onthe Layout box .Exceed 10 areas. Deleteother areas and try again.More than 10 selection areas arecreated in the Original box .