Panasonic KX-PS8000 Reference Manual

Also see for KX-PS8000: Operating instructions Setup manual Specifications Setup manual

Contents

146Error message Possible cause RecoveryKX-PS8000 software is not installedcorrectly.Status Display does notexist.winaspi.dll is not found.Reinstall the KX-PS8000 software.SCSI board is not correctly set.Correctly set the SCSI board in thecomputer. (Refer to the instructionsmanual of the SCSI board.)For any other trouble related to SCSI,refer to the SCSI section ofTroubleshooting ( + P.147).TroubleshootingClick Yes or No on the message window.Yes: Printer and scanner cannot be used.Turn off the system (printer / scanner /computer), then turn it on again.No: Waits until the printer and/or scannerresponds.Printer and/or scanner are notresponding.SCSI device is notresponded.SCSI device can not beused. Because ASPI dllfile is not exist or doesn'tmatch.Confirm that the SCSI board is correctlyinstalled in the computer and it is correctlyset. (Refer to the instructions manual ofthe SCSI board.)For any other trouble related to SCSI,refer to the SCSI section ofTroubleshooting ( + P.147).SCSI board is not installed correctlyin the computer and/or it is not setcorrectly.This ASPI manager doesnot support this mode ofWindows. You typicallysee this error code whenrunning Windows in RealModeSCSI board is not correctly set. Restart Windows in Enhanced mode.Unavailable LPT port is selectedwhen using Windows 3.1.There isn't available LPTPort.Select the other available LPT port byfollowing the procedure below.1. Double click the Main icon.2. Double click the Control Panel icon.3. Double click the Printers icon.4. Click Connect... .5. Click the other port, then click OK.6. Click Close.