Features 3-273 Features EExtension GroupThe system supports 8 extension groups. In an extension group, the following features canbe activated.• Group Call Pickup: Any member of an extension group can pick up a call directed toanother member in the same group.• Paging – Group: Any member of an extension group can make a voiceannouncement to another group member.A hunting group, DISA ring group or UCD group is a specific extension group. Thefollowing operation as well as the features above can be activated for a hunting group, DISAring group or UCD group.Hunting GroupAn extension group enabled in program [100] “Hunting Group Set” will perform theStation Hunting feature. See “Station Hunting” in this section.DISA Ring GroupAll extensions in a DISA ring group assigned as an auto attendant destination inprogram [501] “DISA Built-in Auto Attendant” will ring simultaneously. Selecting“DISA1” or “DISA2” in programs [414]–[416] “Outside (CO) Line Mode —Day/Night/Lunch” is required. Also, you must select “With AA” in program [500]“DISA Incoming Dialing Mode Selection”.UCD GroupOne extension group assigned as the UCD group in program [520] “UCD Group” canbe the destination of incoming outside calls via the UCD feature. Selecting “UCD” inprograms [414]–[416] “Outside (CO) Line Mode — Day/Night/Lunch” is required.• Required System Program Address[600] Extension Group Assignment• Related Feature ReferencesCall Pickup, Direct Inward System Access (DISA), Paging, Station Hunting,Uniform Call Distribution (UCD)+Extension Password / System PasswordThe extension password assigned by the manager (extension jack 01) to each extension canbe used for the Walking COS feature. The system password is used for entering SystemProgramming and also before assigning the extension password.• Required System Programming[002] System Password• Related Feature ReferencesWalking COS• Operating Instructions Reference1.8 Operator / Manager Service Features, “Extension Password Set (Manager only)”+
