4-84 System Programming[803]-[804] 4.2 System ProgrammingSelects to print or not print (on SMDR) secret dialling numbers stored in program [001]“System Speed Dialling Entry” and/or stored in One-Touch Dialling even though they arenot displayed on the LCD.Default No printing• Feature ReferencesSection 3, FeaturesSecret Dialling, Station Message Detail Recording (SMDR)[803] Secret Speed Dialling / One-Touch Dialling Printing308 NEXT SELECT(No Printing/Printing)STORE ENDStarts and stops printing the assigned data. All or a specific area of current system-programmed data is printed out. The areas are as follows.All Para: Prints out all data.System Para: Prints out all data except for the following 4 parameters.CO Para: Prints out programs [400] through [403] and [405] through [424].Ext Para: If the extension is a proprietary telephone, programs [102], [516] [600]through [613] and [615] will be printed out. The assigned data on the PF(Programmable Feature) buttons and line keys will also be printed out.If the extension is a single line telephone, programs [102], [516] and [600]through [614] will be printed out. The assigned Personal Speed Diallingnumbers are also printed out.DSS Para: Prints out the assigned data in the DSS buttons and PF buttons on the DSSconsole.Speed Dial: Prints out the System Speed Dialling numbers and names assigned inprograms [001] and [011].Stop Output : Stops printing.[804] System Data Dump408 NEXT STORESELECT(All/System/CO/Ext/DSS Para/Speed Dial/Stop Output)< To select All parameters, System parameter,Speed dial and/or Stop output. >ENDTo continue+
