1.8 Operator / Manager Service FeaturesOperations 1-97Operator / Manager/ DSS Console Operations• Be sure the handset is on the cradle and the SP-PHONE button is off.• To program, set the MEMORY switch on the proprietary telephone to “PROGRAM”.• After programming, return the MEMORY switch to the “SET” position.• The extension number is displayed in the order of the port number when you press theNEXT or PREV button.• To erase an incorrect entry, press the CLEAR (TRANSFER) button and enter a newnumber.• 1.7 Useful Features, “Calling Using Your Privileges from Another Extension (WalkingCOS)”• See the Installation Manual, Section 3, “Extension Password/System Password”.• See the Installation Manual, Section 3, “Walking COS”.!!+Extension Password Set (Manager only)The manager can assign a password to each extension. The assigned password can be used forthe Walking COS feature.SettingPTDial 7. Enter the systempassword (4 digits).7 passwordPressAUTO DIAL/STORE.AUTO DIALSTORESP-PHONEPressSP-PHONE(NEXT).Enter thepassword(4 digits).passwordPressAUTO DIAL/STORE.AUTO DIALSTOREPress SP-PHONE (NEXT)or REDIAL (PREV) andselect the extension youwant to assign.Repeat these steps.SP-PHONEREDIAL• You may enter the pre-set extensionpassword (4 digits) of extension port 01instead of the system password.
