• This feature will not work if you answer an incoming call or retrieve a call on hold.• Up to 32 digits, consisting of “0 through 9” and “ ”, can be stored. The “ ” button is usedas a PAUSE. However, in the account code verify-all, verify-toll (call barring) and forcedmodes, “ ” is not regarded as a pause.• An account code must be stored by pressing “ ” and entering the account code after theline access code.• During the waiting time after going off-hook, you can call another party and override thisfeature. You can change the waiting time between going off-hook and automatically diallingthrough System Programming.• A rotary telephone cannot use this feature.• See the Installation Manual, Section 3, “Pickup Dialling”.!!1-26 Operations1.3 Making CallsDialling by Simply Going Off-Hook (Pickup Dialling)Allows you to make an outgoing call by just going off-hook (single line telephone only).Storing a phone numberSLTConfirmationtone anddial toneLift the handset or pressSP-PHONE/MONITOR.7 4 2 #Dial 742. Enter the phone number.phone no.Dial #. Hang up or pressSP-PHONE/MONITOR .• You must dial a line access code (9, 0 or 81 through 86) as thefirst digit when storing an external phone number.SLTConfirmation toneand dial toneLift the handset or pressSP-PHONE/MONITOR.Hang up or pressSP-PHONE/MONITOR.To set: Dial 741#.To cancel: Dial 740#.7 4 1 To set.7 4 0## To cancel.Setting / CancellingSLTLift the handset or pressSP-PHONE/MONITOR.Wait for an answer. Talk.Dialling+
