n Base Unit Settings37Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333Ringer setupRinger volume1 " (centre of joystick) i n i #2 Enter the base unit PIN (default:“0000”).3 “Ringer Setup” i #4 “Ringer Volume” i #5 Push the joystick up or down to selectthe desired volume. i # i {ih}Night modeNight mode allows you to select a block oftime during which the base unit will not ringfor outside calls. This feature is useful fortimes when you do not want to be disturbed,for example, while sleeping. Night mode canbe set independently for the handset (page32) and the base unit.Set the date and time beforehand (page 15).Setting the start and end time for nightmode1 " (centre of joystick) i n i #2 Enter the base unit PIN (default:“0000”).3 “Ringer Setup” i #4 “Night Mode” i #5 “Start/End” i #6 Enter the desired hour and minute youwish to start this feature.7 Enter the desired hour and minute youwish to end this feature.8 # i {ih}Turning night mode on1 " (centre of joystick) i n i #2 Enter the base unit PIN (default:“0000”).3 “Ringer Setup” i #4 “Night Mode” i #5 “On/Off” i #6 “On” i # i {ih}Setting the ring delay for night modeThis setting allows the base unit to ringduring night mode if the caller waits longenough. After the selected amount of timepasses, the base unit will ring. If you select“No Ringing”, the base unit will not ringduring night mode.1 " (centre of joystick) i n i #2 Enter the base unit PIN (default:“0000”).3 “Ringer Setup” i #4 “Night Mode” i #5 “Ring Delay” i #6 Select the desired setting. i # i{ih}Note:L When the answering system answers thecall, this feature does not work.Call optionsChanging the recall timeChange the recall time, if necessary,depending on the requirements of yourservice provider or PBX.1 " (centre of joystick) i n i #2 Enter the base unit PIN (default:“0000”).3 “Call Options” i #4 “Recall” i #5 Select the desired setting. i # i{ih}