4 5l TRS / ARS Programming 301-30sTRS Denied Code Entry for Levels 2 through 6Description These allow you to specify the numbers which are toll-restricted foreach toll restriction level as follows:Program [301]: restricts levels 2 through 6Program [302]: restricts levels 3 through 6Program [303]: restricts levels 4 through 6Program [304]: restricts levels 5 through 6Program [305]: restricts level 6Selection l Location number: 01 through 20l Toll call number: 10 digits (max.)Default All locations - Not storedProgramming 1.2.Enter a program address (301 through 305).Display example: 301 TRS DENY L-2Press NEXT.3.4.5.6.Display: Location NO?+Enter a location number.To enter location number 01, you can also press NEXT.Display example: 0l:Not StoredEnter a toll call number.To delete the current entry, press CLEAR.To change the current entry, press CLEAR and enter the new number.Press STORE.To program another location, press NEXT or PREV, orSELECT and the desired location number.7. Repeat steps 4 through 6.8. Press END.Conditions l There is a maximum of 20 toll call numbers which can be restricted foreach program. Each number has a maximum of ten digits, consisting of0 through 9, and * . The character “ * ” can be used as a wild cardcharacter.l Programs [306]-[310] “TRS Excepted Code Entry for Levels 2 through6’ are used to assign exceptions to these numbers. Programs[500]-[501] “Toll Restriction Level - Day / Night” are used to set thetoll restriction value for each COS.Feature References Section 3, FeaturesToll RestrictionSystem Programming 4-79
