417 4 60 Outside Line ProgrammingOutside Line Name AssignmentDescription Assigns names of the company or customer to each outside line so thatthe operator or extension user can find the destination which the calleris trying to reach before answering. If Caller ID is assigned, eachextension can select either the initial display, Caller ID or line name.SelectionDefault All outside lines - Not storedProgramming 1. Enter 417.l Outside line (CO) number: 1 through 3, * ( * =all outside lines)l Name: 10 characters (max.)2.Display: 417 CO LINE NAMEPress NEXT.3.4.Display: CO Line NO?+Enter an outside line number.To enter outside line number 1, you can also press NEXT.Display example: COl:Not StoredEnter a name.5.6.For entering characters, see Section 4.1.3 “Entering Characters”.To delete the current entry, press CLEAR.To change the current entry, press CLEAR and enter the new name.Press STORE.To program another outside line, press NEXT or PREV, orSELECT and the desired outside line number.7. Repeat steps 4 through 6.8. Press END.Conditions l There is a maximum of 24 names. Each name has a maximum of 10characters.l To assign all outside lines to one selection, press the * key in step 3. Inthis case, the display shows the contents programmed for outside line 1.l You can select the initial display, caller ID or outside line name, byStation Rrogramming.Feature References Section 3, FeaturesDisplay, Call Information.4-l 10 System Programming
