OperationUser Manual 832.4.7 Answering a Call WaitingDuring a conversation, a call waiting tone or voice announcement through the speaker or the handsetoccurs when an outside call is received or another extension is letting you know another call iswaiting. To activate this feature, refer to 2.8.3 Receiving a Call Waiting (Call Waiting/Off-Hook CallAnnouncement [OHCA]/Whisper OHCA). (Default: No tone) You can answer the second call bydisconnecting the current call or placing it on hold.To talk to the new party• Depending on the other party's telephone, the "Off-Hook Call Announcement (OHCA)"and the "Whisper OHCA" functions can be applied. You can talk to the other party throughthe speaker and the microphone (OHCA) or you only receive a call announcement throughthe handset (Whisper OHCA), while they are having another conversation using thehandset.• The calling extension's name or number is displayed for 5 seconds in 10 second intervalsbefore answering a call.• As far as it is an intercom, Intelligent Call Handling 1:1 or 1:N call, ISDN extension userscan receive a call when (1) both channels of ISDN extension port are used for conversation,and (2) there is no held call at the ISDN extension port.The user can answer the call by disconnecting the current call or placing it on hold.However, when answering the call by placing the current call on hold, the user cannottransfer nor make a conference involving the held call. When there is a call on wait, no newcall can be made by placing the current call on hold.For any further operating information, refer to the instruction manual of your ISDNextension.Press CO or INTERCOM.Press HOLD.While hearing a toneDisregard this step if bothparties are extensions.Disregard this step if youterminate the current call.Disregard this step if youterminate the current call.DPTWhile hearing a toneSLTORPress Recall and dial 50. On-hook. Off-hook.(Recall)HOLD (CO)INTERCOM5 0
