General Features192 Features GuideOutgoing Message (OGM)*1DescriptionAllows the extension assigned as an operator or manager to record outgoing voice messages.There are three types of outgoing messages that can be recorded.DISA (Direct Inward System Access) message:This message is played when a caller accesses the DISA feature. There can be two differentDISA messages.UCD (Uniform Call Distribution) message:If assigned in the UCD Table, this message is played when all extensions in an UCD groupare busy or not available.There can be four different UCD messages.Timed Reminder message:This message is used in Timed Reminder. When answering the Timed Reminder alarm(often used as a wake-up call), the user will hear this message. There can be only one TimedReminder message.After recording these messages, the operator or manager can also play them back forconfirmation.Conditions• Outgoing messages are numbered as follows:OGM 1 specifies DISA message 1 or UCD message 1OGM 2 specifies DISA message 2 or UCD message 2OGM 3 specifies Timed Reminder message or UCD message 3OGM 4 specifies UCD message 4• A DISA Card is required to program the OGM. One card can be installed per system.System Connection permits two DISA Cards. If there are two DISA Cards, the samemessage is recorded for both simultaneously.Connection References• 2.4.7 DISA Card and Remote Card / Unit InstallationProgramming Guide References• [100] Flexible Numbering• [215] Outgoing Message Time• [990] System Additional Information*1 Available for the KX-TD1232 only.
