General Features208 Features GuidePower Failure TransferDescriptionIf a power failure should happen, or a system is in an off-line condition, specific extensiontelephone instruments are automatically connected to specific outside lines. This providesoutside line conversations between the following extensions and analog outside lines:KX-TD816:Outside line 1 is connected to extension jack number 1Outside line 2 is connected to extension jack number 2Outside line 5 is connected to extension jack number 9Outside line 6 is connected to extension jack number 10KX-TD1232:Outside line 1 is connected to extension jack number 1Outside line 2 is connected to extension jack number 2Outside line 3 is connected to extension jack number 9Outside line 4 is connected to extension jack number 10Outside line 9 is connected to extension jack number 17Outside line 10 is connected to extension jack number 18Single line telephones can work in case of a power failure. Connect these telephoneinstruments to the above extension jacks.Conditions• All other conversations except for the above combinations are disconnected during a powerfailure.• Only the outside line conversations can operate. All other features do not work.Connection References• 2.3.1 Outside Line Connection• 2.3.2 Extension Connection• 2.4.2 4-CO Line Unit Connection• 2.4.3 8-Station Line Unit Connection• 2.5.1 Auxiliary Connection for Power Failure TransferProgramming Guide ReferencesNo programming required.Features Guide References• Power Failure Restart
