3.14 [1-1] Slot—Card Property - Virtual IP ExtensionThe properties of the V-IPEXT card can be specified.Signalling (PTAP) UDP Port No. (Server)Specifies the UDP port used by the V-IPEXT card to transmit and receive PTAP (Panasonic TelephonyAdministration Protocol) data. This must be changed if another network application is using the same port.To change the value displayed here, click Common Settings and set the desired value.Value Range1–65535Maintenance Console Location3.14 [1-1] Slot—Card Property - Virtual IP ExtensionProgramming Manual ReferencesNoneFeature Guide References1.31.1 IP Proprietary Telephone (IP-PT)Signalling (MGCP) UDP Port No. (Server)Specifies the UDP port used by the V-IPEXT card to transmit and receive MGCP (Media Gateway ControlProtocol) data. This must be changed if another network application is using the same port.To change the value displayed here, click Common Settings and set the desired value.Value Range1–65535Maintenance Console Location3.14 [1-1] Slot—Card Property - Virtual IP ExtensionProgramming Manual ReferencesNoneFeature Guide References1.31.1 IP Proprietary Telephone (IP-PT)Signalling (MGCP) UDP Port No. (IP-PT)Specifies the UDP port used to transmit and receive MGCP (Media Gateway Control Protocol) data on theIP-PT side. This must be changed if another network application is using the same port.To change the value displayed here, click Common Settings and set the desired value.176 PC Programming Manual3.14 [1-1] Slot—Card Property - Virtual IP Extension
