6.17 [4-3] DSS ConsoleA DSS Console can be used in conjunction with a PT. A maximum of 8 (with the KX-TDE100/KX-TDE200) or64 (with the KX-TDE600) DSS Consoles can be programmed. The DPT Type—Type of the extension portthat DSS Console is connected must be set to DSS in 3.21 [1-1] Slot—Port Property - Extension Port.Each flexible DSS button can be customised to access a certain feature. A maximum of 66 flexible DSS buttonscan be customised for each DSS Console. Select the desired DSS Console from the DSS Console No. list.To copy DSS Console setting values from one location to another, click the Copy to button.For more information on flexible buttons, see "1.20.2 Flexible Buttons" in the Feature Guide.Pair ExtensionSpecifies the extension number of the PT to be used in pair with the DSS Console.Note that if one or more SDN buttons have been set at the DSS Console, they must be deleted before thissetting can be changed.Value RangeNone, Max. 5 digits (consisting of 0–9)Maintenance Console Location6.17 [4-3] DSS ConsoleProgramming Manual ReferencesNoneFeature Guide ReferencesNoneTypeSpecifies the feature to be assigned to the flexible DSS button.Value RangeNot Stored, Loop CO, Single CO, Group CO, DSS, One-touch, ICD Group, Message Waiting, FWD/DND(Both), FWD/DND (External), FWD/DND (Internal), Group Fwd (Both), Group Fwd (External), Group Fwd(Internal), Account, Conference, Terminate, EFA, Charge, Call Park, Call Log, Log-in/Log-out, Hurry-up,Wrap-up, System Alarm, Time Service, Answer, Release, TRS Level Change, ISDN Service, CLIR, COLR,ISDN Hold, Headset, Time Service - Automatic/Manual, Check In, Check Out, Cleaned Up (KX-TDE600 only),Two-way Record, Two-way Transfer, LCS, Voice Mail Transfer, NDSS, CTI, SDNMaintenance Console Location6.17 [4-3] DSS ConsoleProgramming Manual References6.18 [4-3] DSS Console—DSS key data copyPC Programming Manual 7776.17 [4-3] DSS Console
