2.6.3 Utility—File Transfer PBX (SD Card) to PCCopies system data files from the SD memory card installed in the PBX to the connected PC.This option is only available at Installer level.The files that can be downloaded from the SD memory card are as follows:File Name File TypeDMSYS (KX-TDE100/KX-TDE200) System DataDGSYS (KX-TDE600)$SYSERR Error Data$SYSERR1–$SYSERR9LIC00–LIC99 Activation KeyDownloading the DMSYS/DGSYS system data file allows you to make a backup of the configuration of thePBX.The error data files are snapshots of the configuration of the PBX taken automatically when a major errorcauses a system reset. They can be analysed by your dealer to identify the source of a problem. If there isonly one error data file, its name will be $SYSERR. If there is more than one file, the files will be numbered inchronological order, up to a maximum of 9 files.To transfer files to the PC1. From the Utility menu, select File Transfer PBX (SD Card) to PC.2. Select the file to download from the list of files on the SD memory card.Only the files listed in the table above can be downloaded. Selecting any other file will cause an errormessage to be displayed.3. Click Transfer.The Save dialogue box will be displayed4. Navigate to the folder in which you want to save the file.5. Enter a file name.6. Click Save.A window showing the download progress will be displayed.A message will be displayed when the transfer is complete.7. Click OK.72 PC Programming Manual2.6.3 Utility—File Transfer PBX (SD Card) to PC
