Panasonic KX-TDE200GR Service Manual

Also see for KX-TDE200GR: Features guide

Contents

42KX-TDE200GR8.1.1.15. Utility-CS InformationDisplays information stored by the PBX regarding each Cell Station (CS).This option is only available at Installer level, and requires that the target CSIF, DHLC or DLC card be set to INS status.The displayed items are as follows:To view CS information1. From the Utility menu, select CS Information.2. From the Target CSI/F Slot No drop-down list, select the target slot.• To display information on a single card, select the slot number and name of that card.• To display information on all matching cards, select "All".3. From the Interval Timer drop-down list, select the number of seconds between each automatic screen refresh.4. Click Start to begin monitoring.Monitoring will be performed and the screen will refresh according to the interval specified.To refresh the screen manually at any time, click Refresh.5. Click Stop to end monitoring.6. Select an option:• Click Capture if you want to save the displayed information.1. Enter a file name, or select a file to overwrite.2. Click Save.• Click Cancel to return to the main screen.8.1.1.16. Utility-PS InformationDisplays Portable Station (PS) registration information, including the associated Cell Station (CS).This option is only available at Installer level.The displayed items are as follows:To view PS information1. From the Utility menu, select PS Information.2. Click Refresh.Item DescriptionSlot Number of the slot.Port Number of the portCS Name Name of the attached CSStatus Service status of the attached CS: INS, OUS, or FAULT.If the status is FAULT, subsequent data items for that port will be left blank.Version Version number of the program file stored in the CSRevision Revision number of the program file stored in the CSCSID 12-digit ID number of the CSPath Number of the wireless extension currently using each path. In the case of a group, severalextensions may be using the same floating extension number.When an extension number is not registered, the display shows "OFF". PSs can use up to 3paths.Group Call Number of PSs registered to the attached CS that are members of a PS Ring Group.Item DescriptionPS No. PS location number.Only registered PSs will be displayed.Extension Number Extension number of the PS.Location-Slot Slot number of the CS that the PS is registered with.LocationóPort Port number of the CS that the PS is registered with.