1.1 Incoming Call Features14 Feature Guide1.1 Incoming Call Features1.1.1 Incoming Outside (CO) Line Call Features1.1.1.1 Direct In Line (DIL)DescriptionDirects incoming outside (CO) line calls to a preprogrammed destination based on the outside (CO) linecarrying the call. Each outside (CO) line can have a different destination for each time service mode.[Programming Example]The table can be programmed for each outside (CO) line.In this example:If an outside (CO) line call is received on outside (CO) line 1:a) In day mode: Direct In Line (DIL) distribution is assigned. The call is routed to its DIL destination,extension 101.b) In lunch/night mode: DIL distribution is assigned. The call is routed to its DIL destination, extension102.Conditions• To use this feature, "DIL" must be selected as the distribution method for the desired outside (CO) lineport. When "Normal" is selected, an incoming outside (CO) line call is received at the extensionsassigned in Flexible Ringing—Day/Night/Lunch [408-410].• This outside (CO) line can be used by multiple extension users to make calls, but can only be used bya single extension to receive calls.• If a DIL destination is an extension within an extension group that has enabled the Idle ExtensionHunting feature and it is busy, the Idle Extension Hunting feature becomes active ( 1.2.1 IdleExtension Hunting).Feature Guide References2.2.3 Time ServiceOutside (CO) Line No. Distribution method and destination*Day Lunch Night1 DIL 101 DIL 102 DIL 1022 DIL 103 DIL 103 DIL 1033 Normal – Normal – Normal –* CO Line Mode—Day/Night/Lunch [414-416]
