1.20 Administrative Information Output FeaturesFeature Guide 153The following data can be controlled through system programming to adjust whether (or how) they areprinted or displayed by SMDR.[Programmable Items]Conditions• Multilingual Display by SMDRIt is possible to select the display language used for SMDR through system programming ( SMDRLanguage [806]).Item DescriptionIncoming/Outgoing outside(CO) line callControls whether incoming/outgoing outside (CO) line calls areshown ( Incoming/Outgoing Call Selection for Printing [802]). Evenif "On" or "Toll" is selected for outgoing outside (CO) line calls or evenif "On" is selected for incoming outside (CO) line calls, when "MODE2" is selected in SMDR Mode for Printing [929], the call loginformation is not displayed by SMDR, but the information for eachextension is displayed by Call Log Printout.If "Toll" is selected for outgoing outside (CO) line calls, only calls thatare checked in TRS—COS 2-5 Denied Code [302-305] and areallowed, are shown.Caller's identification Controls whether a caller's telephone number is shown ( Caller IDSMDR Format [906]). When this is set to display telephone numbers,even if the PBX receives a caller's name by the Caller ID feature, onlythe telephone number is shown.Secret Dialling Controls whether secret dialling numbers stored in System SpeedDialling Number [001] or stored in One-touch Dialling button areshown by SMDR ( Secret Number SMDR Print Suppression [803]).Account Code Controls whether the account code stored in Account Code [310] orjust the index of the account code is shown ( SMDR Account Code[805]). The index of the account code is shown when "Verify-All" or"Verify-Toll" is selected in Account Code Mode [605].System programming items Controls whether system programming items that have already beenassigned are shown based on the following parameters ( SystemData Dump [804]):a) All para: All datab) System para: All data except for "CO para", "Extn. para","DSS para" and "Speed dial"c) CO para: The data assigned for each outside (CO) lined) Extn. para: The data assigned for each extensione) DSS para: The data assigned on the Direct StationSelection (DSS) buttons and Programmable Feature (PF)buttons on the DSS Consolef) Speed dial: The System Speed Dialling numbers andnames in System Speed Dialling Number [001] and SystemSpeed Dialling Name [011]g) Stop output: Not shown
