1.8 Using User-supplied Equipment102 User ManualScreening Calls (Live Call Screening [LCS])Before operating• Create a Live Call Screening (LCS) button.• Select the mode, either Hands-free or Private.• Set the LCS password.• Set the LCS feature.To set/cancel the LCS password• If a proprietary telephone (PT) user sets the FWD—Busy/No Answer feature, the FWD/DND button light will keep flashing while on-hook. To stop the button from flashing, go off-hook and enter "716#".Customising Your Phone• 3.1.3 Customising the ButtonsCreate or edit an FWD/DND (Call Forwarding/Do Not Disturb) button, Messagebutton, Voice Mail (VM) Transfer button, or Direct Station Selection (DSS) button.While a caller is leaving a message in your mailbox, you can monitor the call,and choose whether to answer or not. There are 2 methods available. (Default:Hands-free mode)Hands-free mode:You can monitor the message automatically, live through the telephonespeaker.Private mode:You will hear the following alert tone while the caller is leaving a message.1 sNo SLTOff-hook.On-hook.Enter LCS password (3 digits)2 times to set or one time to cancel.PTLCSpassword LCSpasswordLCSpasswordSetCancel77Enter 77 .ORC.ToneEnter #.
