Panasonic KX-TG1805NZ Operating Instructions Manual

Panasonic KX-TG1805NZ Operating Instructions Manual Manual pdf 14 page image

Phonebook14Using the phonebookThe phonebook allows you to make callswithout having to dial manually. You can add20 names and phone numbers to thephonebook and search for phonebookentries by name.Adding entries to the phonebook1 Press {k}, then press {j/OK}.2 Select “New Entry”, then press {>}.3 Enter the party’s name (16 charactersmax.; see page 32 for character entry),then press {j/OK}.4 Enter the party’s phone number (24digits max.), then press {j/OK}.5 Select “Save”, then press {>}.6 Press {ih}.Note:L If there is no space to store new entries,“Memory Full” will be displayed. Eraseunnecessary entries (page 14).To edit/correct a mistakePress {<} or {>} to place the cursor on thenumber or character you wish to erase, thenpress {C/T}. Place the cursor to the right ofwhere you want to insert a number orcharacter, then press the appropriate dialkey.Note:L Press and hold {C/T} to erase allnumbers or characters.Finding and calling a phonebookentryPhonebook entries can be searched for byscrolling through all phonebook entries.Once you have found the desired entry,press {C} to dial the phone number.Scrolling through all entries1 Press {k}.2 Press {e} or {v} repeatedly to displaythe desired entry.Editing entries in the phonebookPhonebook entries can be edited after youhave saved them. You can change the nameand phone number.Changing a name and phone number1 Find the desired entry (page 14), thenpress {j/OK}.2 Select “Edit”, then press {>}.3 Edit the name if necessary (16characters max.; see page 32 forcharacter entry), then press {j/OK}.4 Edit the phone number if necessary (24digits max.), then press {j/OK}.5 Select “Save”, then press {>}.6 Press {ih}.Erasing entries from thephonebookErasing an entry1 Find the desired entry (page 14), thenpress {j/OK}.2 Select “Erase”, then press {>}.3 Select “Yes”, then press {>}.4 Press {ih}.Erasing all entries1 Press {k}, then press {j/OK}.2 Select “Erase All”, then press {>}.3 Select “Yes”, then press {>}.4 Select “Yes” again, then press {>}.5 Press {ih}.