Panasonic KX-TG1805NZ Operating Instructions Manual

Panasonic KX-TG1805NZ Operating Instructions Manual Manual pdf 23 page image

Base Unit Settings233 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (page25).4 Select “Ringer Setup”, then press{>}.5 Select “Night Mode”, then press {>}.6 Select “Ring Delay”, then press {>}.7 Select the desired setting, then press{>}.8 Press {ih}.Call optionsChanging the recall timeChange the recall time, if necessary,depending on the requirements of yourservice provider or PBX.1 Press {j/OK}.2 Select “Base Unit Setup”, thenpress {>}.3 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (page25).4 Select “Call Options”, then press{>}.5 Select “Recall”, then press {>}.6 Select the desired setting, then press{>}.7 Press {ih}.Setting pause lengthChange the pause length, if necessary,depending on the requirements of yourservice provider or PBX.1 Press {j/OK}.2 Select “Base Unit Setup”, thenpress {>}.3 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (page25).4 Select “Call Options”, then press{>}.5 Select “Pause Length”, then press{>}.6 Select the desired setting, then press{>}.7 Press {ih}.Storing/changing emergencynumbersThese settings determine which phonenumbers can be dialled while the call barfeature is on (page 18).1 Press {j/OK}.2 Select “Base Unit Setup”, thenpress {>}.3 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (page25).4 Select “Call Options”, then press{>}.5 Select “Emergency No.”, then press{>}.6 Select a memory location, then press{>}.L If the memory location alreadycontains an emergency number, thenumber is displayed.7 Enter/edit the number, then press{j/OK}.L To erase an emergency number, pressand hold {C/T}.8 Press {ih}.Note:L The default setting for emergencynumbers are stored in the first 3 memorylocations. It is recommended that you donot overwrite these numbers.