Panasonic KX-TG1805NZ Operating Instructions Manual

Panasonic KX-TG1805NZ Operating Instructions Manual Manual pdf 30 page image

Multi-unit Operation303 Enter “0000” (default base unit PIN).L If you changed the PIN, enter it (page25).4 Select “Other Options”, then press{>}.5 Select “Repeater Mode”, then press{>}.6 Select “On” or “Off”, then press {>}.7 Press {ih}.Note:L After turning repeater mode on/off, youwill not be able to make or receive calls fora few moments.Intercom betweenhandsetsIntercom calls can be made betweenhandsets in the same radio cell, but notbetween handsets in different radio cells.Example: When handset 1 calls handset 21 Handset 1:Press {INT} and {2} (desired handsetnumber).2 Handset 2:Press {C} to answer.3 When finished talking, press {ih}.Transferring callsbetween handsetsOutside calls can be transferred between 2handsets in the same radio cell.Example: When handset 1 transfers a callto handset 21 Handset 1:During an outside call, press {INT} and{2} (desired handset number).L The outside call will be put on hold.L If there is no answer, press {INT} toreturn to the outside call.2 Handset 2:Press {C} to answer the page.L Handset 2 can talk with handset 1.3 Handset 1:To complete the call transfer, press{ih}.Transferring a call without speaking tothe other handset user1 During an outside call, press {INT}, thenpress the desired handset number.L The other handset rings if it is withinrange of the base unit and turned on.2 Press {ih}.L The outside call rings at the otherhandset.Note:L k flashes to indicate the outside call is onhold.L If the other handset user does not answerthe call within 1 minute, the call will ring atyour handset again.