84Pager CallTo erase the pager number1. Press (FUNCTION), and pressor until the arrow points to“Pager setting”, and pressH.2. While “Pager number” is at thearrow, press H.3. Press (CLEAR).4. Press (ENTER).•The pager call mode will automaticallyreturn to OFF (see below).Setting the Unit to Call a PagerTo erase the pager displaynumber1. Press (FUNCTION), and pressor until the arrow points to“Pager setting”, and pressH.2. Press or until the arrowpoints to “Pager display #”,and press H.3. Press (CLEAR).4. Press (ENTER).1 Press (FUNCTION).2 Press or until the arrowpoints to “Pager setting”,and press H.3 Press or until the arrowpoints to “Pager on/off”, andpress H.• “Off” (factory preset) is displayed.4 Select “On” by pressing or.5 Press (ENTER).• A beep sounds.• To return to the standby mode,press (EXIT).• If using the base unit, “Pager” willbe displayed.P a g e r o n / o f f: O n∨∧ E N T E R = S a v e• If another message is received beforethe unit alerts your pager for aprevious message, the previous callerinformation will not be sent to yourpager. Only the last call received willbe sent to your pager.• If someone else makes or answersanother call with your unit before theunit alerts your pager for a previousmessage, the unit will stop alertingyour pager for that message.• If you receive a telephone number onyour pager but cannot recognize thecaller, you may have received a directinward dial (DID) call, such as from aPBX. Please call your unit to checkthe caller’s message.If you have not subscribed to a CallerID service, the caller’s telephonenumber will not be displayed on yourpager.To turn off the pager call mode,select “Off” in step 4.
