Panasonic KX-TG2226BV Operating Instructions Manual

Contents

Panasonic KX-TG2226BV Operating Instructions Manual Manual pdf 53 page image

53For assistance, please call: 1-800-211-PANA(7262)Useful InformationTroubleshootingCordless TelephoneProblem Cause & Remedy“No link to base.Place on cradle andtry again.” is displayedand an alarm tone sounds.• You are too far from the base unit. Walk closerand try again.• Place the handset on the base unit and tryagain.• Plug in the AC adaptor.• Raise the base unit antenna.Static, sound cuts in/out,fades. Interference fromother electrical units.• Move the handset and the base unit away fromother electrical appliances (p. 3).• Walk closer to the base unit.• Raise the base unit antenna.• Select a clearer channel (p. 24, 37).The handset and/or baseunit does not ring.• The ringer volume is set to OFF. Set to HIGH,MEDIUM or LOW (p. 18).• When the handset is on the base unit, thehandset does not ring. Only the base unit ringswhen receiving a call.The handset display isblank.• Charge the battery fully (p. 9).You cannot programfunction items.• Programming is not possible while the unit isbeing used.• Do not pause for over 60 seconds whileprogramming.• Walk closer to the base unit.While programming orsearching, the unit starts toring and stops theprogram/search.• A call is coming in. To answer the call, press[ ] or [ ]. Start again from the beginning afterhanging up.You cannot make a callwith the handset.• Your handset is in remote operation mode(p. 42). Exit by pressing [OFF].You cannot redial. • If the last number dialed was more than 32 digitslong, the number will not be redialed correctly.