Useful Information47Making/answering calls, IntercomPhonebookProblem Cause & solutionStatic is heard, soundcuts in and out.Interference from otherelectrical units.L Move the handset and the base unit away from otherelectrical appliances.L Move closer to the base unit.L Raise the base unit antenna.L Turn on the clarity booster feature (page 19).L If your unit is connected to a telephone line with xDSLservice, we recommend connecting a noise filterbetween the base unit and the telephone line jack.Contact your xDSL provider for details.The handset does notring.L The ringer volume is turned off. Adjust it (page 34).I cannot make a call. L The dialing mode may be set incorrectly. Set the dialmode (page 36) to match the type of telephone serviceyou have (tone or pulse).L If the base unit or the other handset is in use, you maynot be able to make a call. Try again later.I cannot redial bypressing {REDIAL}.L If the last number dialed was more than 48 digits long,the number will not be redialed correctly.L If you press {REDIAL} after you have started dialing,this button functions as the {PAUSE} button. To redial,do not dial any numbers before pressing {REDIAL}.I cannot have aconversation using theheadset.L Make sure that an optional headset is connectedproperly (page 41).L If “SP-phone” is displayed on the handset, press {C}to switch to the headset.I cannot make longdistance calls.L Make sure that you have long distance service.I cannot page thehandset.L The called handset is too far from the base unit.L The called handset is in use. Try again later.Problem Cause & solutionI cannot store an item inthe phonebook.L You cannot store an item in the phonebook while thehandset is in talk, speakerphone or intercom mode.L Do not pause for over 1 minute while storing.While storing an item inthe phonebook, thehandset starts to ring.L A call is being received. Answer the call and start againfrom the beginning after hanging up.TG2421C_2424C(e).book Page 47 Wednesday, December 22, 2004 6:54 PM