Programming27*1 If “System setting” column is checked, you do not need to program the same itemusing another handset.*2 If you subscribe to Call Display service and want to view the caller’s informationafter lifting up the handset to answer a call, turn off this feature.*3 Turn this feature off if you prefer not to hear key tones while you are dialing orpressing any keys, including confirmation tones and error tones.*4 If you subscribe to a distinctive ring service, select a tone (tone 1 to 3). If youselect a melody, you cannot distinguish lines by their ringers.*5 The flash time depends on your telephone exchange or host PBX. Consult yourPBX supplier if necessary.*6 Generally, the line mode setting should not be adjusted. If “Line in use” is notdisplayed when another phone connected to the same line is in use, you need tochange the line mode to “A”.*7 This feature allows the unit to automatically adjust the date and time setting whencaller information is received. To use this feature, set the date and time first.AlarmAn alarm will sound once for 3 minutes at the set time.Set the date and time beforehand (page 14).1 {MENU} i {8}2 {V}/{^}: “Once” i {Select}L To turn off the alarm, select “Off”. i {Select} i {OFF}3 Set the desired date and time. i {Save}4 {V}/{^}: Select the desired ringer tone. i {Save}L We recommend selecting a different ringer tone from outside call.5 {OFF}Note:L To stop the alarm, press any dial key or place the handset on the base unit orcharger.L When the handset is in use, the alarm will not sound until the handset is in standbymode.Customer supportThe handset can display the Internet address where you can download the operatinginstructions or get further information for this product using your computer.{MENU} i {V}/{^}: “Customer support” i {Select} i {OFF}Voice prompt(Change language){0}{8}{2} {1}: <English>{2}: Françaisr 14Feature FeaturecodeSetting code Systemsetting*1PageTG302X_303XC(e).book Page 27 Monday, December 25, 2006 1:30 PM