Panasonic KX-TG3021C Operating Instructions Manual

Multi-unit Operation37Transferring callsbetween handsets,conference callsOutside calls can be transferredbetween 2 handsets. 2 handsets canhave a conference call with an outsideparty.1 During an outside call, press{INTERCOM} to put the call on hold.2 {V}/{^}: Select the desired unit. i{Transfer}3 Wait for the paged party to answer.L If the paged party does not answer,press {C} to return to the outsidecall.4 To complete the transfer:Press {OFF}.L The outside call is being routed tothe handset.To establish a conference call:Press {Conf}.L To leave the conference, press{OFF}. The other parties cancontinue the conversation.L To put the outside call on hold,press {HOLD}. To resume theconference, press {Conf}.Answering transferred callsPress {C} to answer the page.L After the paging party disconnects,you can talk to the outside caller.Registering a handsetThe included handset and base unit arepreregistered. If for some reason thehandset is not registered to the baseunit, register the handset.1 Handset:{MENU} i {0}{0}{1}2 Base unit:KX-TG3021/KX-TG3023/KX-TG3024Press and hold {LOCATOR} untilthe IN USE indicator flashes.KX-TG3031/KX-TG3032/KX-TG3033Press and hold {LOCATOR/INTERCOM} until the IN USEindicator flashes.L After the IN USE indicator startsflashing, the rest of the proceduremust be completed within 1minute.3 Handset:Press {OK}, then wait until a beepsounds.4 {OFF}Registering an additional handsetSee page 5 for information on theavailable model.Start from step 2.Deregistering a handset1 {MENU} i {0}{0}{2}2 {3}{3}{5} i {OK}3 Select the handset you want tocancel by pressing the desiredhandset number ({1} – {4}).TG302X_303XC(e).book Page 37 Monday, December 25, 2006 1:30 PM