Making Calls28To dial after confirming theentered number1. Dial a phone number.• If you misdial, press the soft key( ). Enter the correct phonenumber.• If a pause is required when dialing,press the soft key ( ) whereneeded (p. 55).• To cancel, press [OFF].2. Press [C] or [s].3. To hang up, press [OFF] or placethe handset on the base unit.To adjust the receiver/speaker volume during aconversationThere are 3 volume levels for thereceiver and 6 volume levels for thespeaker.To increase volume, press [B].To decrease volume, press [d].• The display shows the current volumesetting.• If you try to increase/decrease volumewhen it is at the maximum/minimumlevel, the handset will beep 3 times.To redial the last numberdialedPress [C] or [s], then press[REDIAL].To redial using the rediallist (Memory Redial)The last 5 phone numbers dialed withthe handset are stored in the redial list.1. Press [REDIAL].• The last number dialed isdisplayed.2. Scroll to the desired number bypressing [d] or [B].• You can also scroll down throughthe list by pressing [REDIAL].• To exit the list, press [OFF].3. Press [C] or [s].• To erase an item, scroll to the itemthen press the soft key ( ).• If “No items stored” is displayed,the list is empty.To put a call on holdPress [HOLD/INTERCOM] twiceduring a conversation.• “Hold” is displayed.• To transfer the call to the base unit oranother handset, see page 49; totransfer to a mailbox to allow theoutside party to leave a message, seepage 70.To return to the call, press [C] or[s].• The base unit user can take the call bypressing [SP-PHONE].• Another handset user can take the callby pressing [C] or [s].• If another phone is connected on thesame line (p. 12), you can also takethe call by lifting its handset.• If a call is kept on hold for 6 minutes,an alarm tone will start to sound andthe Ringer indicator will start to flashrapidly. After 4 additional minutes onhold the call will be disconnected.3334444 |CLEARPAUSEVolumeLow HighdBEx. Receiver volume: HighSpeaker volume: Level 6ERASE