Panasonic KX-TG5240M Operating Instructions Manual

Also see for KXTG5243 - KXTG5240M TOT 3 H/S: Operating instructions

Contents

Useful InformationAnswering SystemPreparation31Answering CallsFor assistance, please call: 1-800-211-PANA(7262)Telephone SystemTo put a call on holdPress [HOLD] during a conversation.• The SP-PHONE indicator flashes.To return to the call, press [SP-PHONE].• Handset users can take the call by pressing [C] or [s].• If another phone is connected on the same line (p. 12), you can also take the callby lifting its handset.• If a call is kept on hold for 6 minutes, an alarm tone will start to sound and theRinger indicator on the handset will start to flash rapidly. After 4 additional minuteson hold the call will be disconnected.Answering CallsWhen a call is received, the unit rings, “Incoming call” is displayed on thehandset, and the Ringer indicator and the IN USE indicator flash rapidly.1 Press [C] or [s].• You can also answer a call by pressing anybutton except [d], [B] and [OFF].2 To hang up, press [OFF] or place thehandset on the base unit.Auto TalkIf you set the Auto Talk feature to ON (p. 19), you cananswer a call by lifting the handset off the base unit orthe charger (for accessory handset users, p. 3).1 Press [SP-PHONE].2 Talk into the MIC.3 To hang up, press [SP-PHONE].• To transfer the call to the base unit or handset, see page 49.• To transfer the call to a mailbox to allow the caller to leave a message,see page 70.• When the ringer volume is set to OFF, the unit will not ring (p. 20, 21).Handset[ ][ ][OFF]RingerIndicatorBase UnitMIC[SP-PHONE]and IndicatorIN USEIndicator