Answering System Features48 For assistance, please visit http://www.panasonic.com/consumersupportNote:L Caller information for the erasedmessages will remain in the caller list.Listening to messages usingthe handsetWhen new messages have beenrecorded, “New message” is displayed.L If you have both new messages andmissed calls and you selected awallpaper pattern to be shown on thedisplay (page 39), the handset will notdisplay “New message” while it is on thebase unit.1 Press {MENU} (middle soft key).2 Press {PLAY}.L The unit will announce the number ofnew messages, and will play back thenew messages.L To switch to the receiver and to listento the messages with privacy, press{C}. You can switch back to thespeaker by pressing {s}.L When you have no new messages,the unit will announce “No newmessages. All message playback”,and will play back all messages.L After the last message is playedback, the unit’s voice guidance starts.Follow the guidance as necessary.3 Press {OFF} when finished.Note:L Adjust the speaker or receiver volumeusing {V} or {^}.L You can also play back messages asfollows:Press {MENU} (middle soft key), press{SELECT} at J, then press{SELECT} at “Message playback”.L At the end of the last message, the unitannounces “End of final message”.Repeating a messagePress {<} while listening to the message.L If pushed within the first 5 seconds of amessage, the previous message will beplayed.Skipping a messagePress {>} to play the next message.Voice guidanceIf you do not press any buttons after thelast message is played back, the unit’svoice guidance starts. Operate theanswering system by following theguidance as necessary.The unit will announce “Press 4 to playback new messages. Press 5 to play backall messages.”L You can press buttons for otherplayback options (page 49) even if thevoice guidance has started.L If you do not press any button within 10seconds after the voice guidance, thehandset returns to standby mode.{OFF}{MENU}