Panasonic KX-TG5511FX Operating Instructions Manual

Programming31Viewing/editing/erasing bar callnumbers1 8 i {#}{2}{1}{7}2 {V}/{^}: Select the desired entry.L To exit, press {ic}.3 To edit a number:~ i Edit the phone number.i M i {ic}To erase a number:W i {V}/{^}: “Yes” i Mi {ic}Note:L When editing, press the desired dialkey to add, ^ to erase.Changing the base unit PIN(Personal IdentificationNumber)Important:L If you change the PIN, please makenote of your new PIN. The unit will notreveal the PIN to you. If you forgetyour PIN, contact an authorisedservice centre.1 8 i {#}{1}{3}{2}2 Enter the current 4-digit base unitPIN (default: “0000”).3 Enter the new 4-digit base unit PIN.i M i {ic}Registering a unitOperating additional unitsAdditional handsetsUp to 6 handsets can be registered tothe base unit.Important:L The additional handset modelrecommended for use with this unit isnoted on page 5. If another handsetmodel is used, certain operations(handset settings, base unit settings,etc.) may not be available.Registering a handset to thebase unitThe supplied handset and base unit arepre-registered. If for some reason thehandset is not registered to the base unit(for example, _ is displayed even whenthe handset is near the base unit), re-register the handset.1 Handset:8 i {#}{1}{3}{0}2 Base unit:Proceed with the operation for yourmodel.■ KX-TG5511Press and hold {x} for about 5seconds. (No registration tone)■ KX-TG5521Press and hold {x} for about 5seconds, until the registrationtone sounds.L If all registered handsets startringing, press the same button tostop. Then repeat this step.L The next step must be completedwithin 90 seconds.3 Handset:Wait until “Base PIN” is displayed.i Enter the base unit PIN (default:“0000”). i ML If you forget your PIN, contact anauthorised service centre.L When the handset has beenregistered successfully, w isdisplayed.TG5511-5521FX(e).book Page 31 Thursday, April 22, 2010 1:24 PM