Panasonic KX-TG7200TW Operating Instructions Manual

Answering System Features26Turning remote operation onA 3-digit remote access code must beentered when operating the answeringsystem remotely. This code preventsunauthorised parties from listening toyour messages remotely.1 {j/OK}2 {^}/{V}: “Answer System” i{>}3 {^}/{V}: “Settings” i {>}4 {^}/{V}: “Remote Code” i {>}5 To turn on remote operation, enter a3-digit remote access code.L To turn off remote operation,press {*}.6 {j/OK} i {ih}Using the answering systemremotely1 Dial your phone number from atouch-tone phone.2 After the greeting message starts,enter your remote access code.L The unit will announce thenumber of new messages.L After 3 seconds, voice guidancestarts.3 Follow the voice guidance promptsas necessary.Note:L You can hang up at any time.Voice guidanceDuring remote operation, the unit’s voiceguidance will prompt you to press {1} toperform a specific operation, or press{2} to listen to more availableoperations.Remote commandsYou can press dial keys to accesscertain answering system functionswithout waiting for the voice guidance toprompt you.Turning on the answeringsystem remotelyIf the answering system is off, you canturn it on remotely.1 Dial your phone number from atouch-tone phone.2 Let the phone ring 20 times.L A long beep will be heard.Key Operation{1} Repeat message (duringplayback) *1{2} Skip message (duringplayback){4} Play new messages{5} Play all messages{6} Play greeting message{7} Record greetingmessage{9} Stop (recording,playback){0} Turn answering systemoff{*}{4} Erase currently playingmessage{*}{5} Erase all messages{*}{6} Erase greeting message(during greeting messageplayback){*}{#} End remote operation (orhang up)*1 If pressed within the first 5seconds of a message, theprevious message will be played.TG7200-7220TW(e-e).book Page 26 Wednesday, April 25, 2007 4:49 PM