Panasonic KX-TG7412C Operating Instructions Manual

Programming24*1 If “System setting” column is checked, you do not need to program the same itemusing another handset.*2 If you subscribe to a Call Display service and want to view the caller’s informationafter lifting up the handset to answer a call, turn off this feature.*3 The handset can display the Internet address where you can download theoperating instructions or get further information for this product, using yourcomputer.*4 Turn this feature off if you prefer not to hear key tones while you are dialing orpressing any keys, including confirmation tones and error tones.*5 If you subscribe to a distinctive ring service, select a tone (tone 1 to 3). If you selecta melody, you cannot distinguish lines by their ringers.*6 If you select one of the melody ringer tones, the ringer tone continues to play forseveral seconds even if the caller has already hung up. You may either hear a dialtone or no one on the line when you answer the call.*7 When the ringer volume is turned off, ~ is displayed and the handset does not ringfor outside calls.However even when the ringer volume is set to off, the handset rings at the lowlevel for alarm (page 25), and intercom calls, and paging (page 41).*8 The flash time depends on your telephone exchange or host PBX. Contact yourPBX supplier if necessary.*9 Generally, the line mode setting should not be adjusted. If S is not displayedwhen another phone connected to the same line is in use, you need to change theline mode to “A”.*10This feature allows the unit to automatically adjust the date and time setting whencaller information is received. To use this feature, set the date and time first.Recordgreeting{3}{0}{2} – r 34Recording time {3}{0}{5} {1}: 1min {2}: 2min{3}: <3min>{0}: Greeting onlyr 38Remote code {3}{0}{6} <111> r 36Ring count {2}{1}{1} {2}–{7}: 2–7 rings <4>{0}: Toll saverr 37TalkingCallerID(Talking CallDisplay) (Handset){1}{6}{2} {1}: <On> {0}: Off – 29TalkingCallerID(Base unit){*}{1}{6}{2}{1}: On {0}: <Off> r 29Voice prompt(Change language){1}{1}{2} {1}: <English>{2}: Françaisr 14Feature FeaturecodeSetting code Systemsetting *1PageTG74xxC(e).book Page 24 Monday, February 16, 2009 1:44 PM