Panasonic KX-TG7412C Operating Instructions Manual

Programming26sleeping. Night mode can be set for eachhandset.Important:L Set the date and time beforehand(page 14).L We recommend turning the base unitringer off (page 16) and call screeningoff (page 33) in addition to turning thenight mode on. (KX-TG7431 series:page 3)L If you have set the alarm, the alarmsounds even if the night mode isturned on.Turning night mode on/off1 {MENU} (centre of joystick) i{#}{2}{3}{8}2 {V}/{^}: Select “On” or “Off”. i{SAVE}L If you select “Off”, press {OFF}to exit.3 Enter the desired hour and minuteyou wish to start this feature.4 {AM/PM}: Select “AM” or “PM”. i{OK}5 Enter the desired hour and minuteyou wish to end this feature.6 {AM/PM}: Select “AM” or “PM”.7 {SAVE} i {OFF}L When the night mode is set, 3 isdisplayed.Note:L To correct a digit, push the joystick leftor right to move the cursor to the digit,then make the correction.Changing the start and end time1 {MENU} (centre of joystick) i{#}{2}{3}{7}2 Continue from step 3, “Turning nightmode on/off”, page 26.Call block (Call Displaysubscribers only)This feature allows the unit to reject callswhen:– the unit receives a call from a phonenumber stored in the call block list asunwanted (“Storing unwanted callers”,page 26).– the unit receives a call without phonenumber (“Block calls without phonenumber”, page 27).When a call is received, the unit rings fora short time while the caller is beingidentified. If the unit recognizes the callas unwanted, “Caller blocked” isdisplayed and the unit sends out a busytone to the caller, and then disconnectsthe call.Important:L When the unit receives a call from anumber that is stored in the call blocklist or a call without a recognizedphone number, the call is logged in thecaller list (page 31) with $ after thecall is disconnected.Storing unwanted callersYou can store up to 30 phone numbers inthe call block list by using the caller list orby entering the numbers directly.Important:L You must store the phone numberwith an area code (10 digits) in the callblock list.■ From the caller list:1 {MENU} (centre of joystick) i{#}{2}{1}{3}2 {V}/{^}: Select the entry to beblocked. i {SELECT}L To edit the number, press{EDIT} repeatedly until thephone number is shown in the10-digit format.TG74xxC(e).book Page 26 Monday, February 16, 2009 1:44 PM