Panasonic KX-TG7521BX Operating Instructions Manual

Programming28Note:L To correct a digit, press {<} or {>} tomove the cursor to the digit, thenmake the correction.Changing the start and end time1 1 i {#}{2}{3}{7}2 Continue from step 3, “Turning nightmode on/off”, page 27.Setting the ring delayThis setting allows the handset to ringduring night mode if the caller waits longenough. After the selected amount oftime passes, the handset rings. If youselect “No Ringing”, the handsetnever rings during night mode.1 1 i {#}{2}{3}{9}2 {V}/{^}: Select the desired setting.i M i {ic}Note:L When the answering system answersthe call, this feature does not work.(KX-TG7521)Selecting categories to bypass nightmode1 1 i {#}{2}{4}{1}2 {V}/{^}: Select your desiredcategories. i tL “Q” is displayed next to theselected category numbers.L To cancel a selected category,press t again. “Q” disappears.3 M i {ic}Note:L You can also select the categories instep 2 as follows:Press {1} to {9}. i MChanging the handset nameEach handset can be given acustomised name (“Bob”, “Kitchen”,etc.). You can also select whether or notthe handset name is displayed instandby mode. The default setting is“Off”. If you select “On” withoutentering any handset name, “Handset1” to “Handset 6” is displayed.1 1 i {#}{1}{0}{4}2 Enter the desired name (max. 10characters; page 44).L If not required, go to step 3.3 M4 {V}/{^}: Select the desired setting.i M 2 times5 {ic}Storing an area code to bedeleted automaticallyIn some situations, phone numbersstored automatically in the caller list(page 33) will include area codes. If youdo not want to dial the area code whenmaking calls from the caller list, you canstore the area code which you want theunit to delete automatically.Example: You have stored the areacode “123”. If you make a call from thecaller list to the phone number “123-456-7890”, the unit dials “456-7890”.1 1 i {#}{2}{5}{5}2 Enter an area code (5 digits max.).i M i {ic}Incoming call barring (CallerID subscribers only)This feature allows the unit to reject callsfrom specified phone numbers that youdo not want to answer such as junk calls.When a call is received, the unit does notring while the caller is being identified. IfTG7511_7521BX(e).book Page 28 Tuesday, June 15, 2010 2:10 PM