Panasonic KX-TG7521BX Operating Instructions Manual

Answering System39Erasing all messagesPress {4} 2 times while the unit is not inuse.Listening to messagesusing the handsetWhen new messages have beenrecorded, u is displayed on thehandset with the total number of newmessages.1 To listen to new messages:1 i {#}{3}{2}{3}To listen to all messages:1 i {#}{3}{2}{4}2 When finished, press {ic}.Note:L To switch to the receiver, press {C}.L If “Messages Full” is shown on thedisplay, u and the total number ofnew messages are not displayed.Listening to messages fromthe message listYou can select the item to play back.1 1 i {#}{3}{2}{9}2 {V}/{^}: Select the desired item fromthe message list. i 0L You can erase the selectedmessage as follows:W i {V}/{^}: “Yes” i M3 When finished, press {ic}.Note:L If the item has already been heard,“Q” is displayed.L “Message” is displayed in themessage list for any recordedconversations or if the unit cannotreceive caller information.Operating the answeringsystem1 i D i M*1 If pressed within the first 5 seconds ofa message, the previous message isplayed except when playing backfrom the message list.*2 When you play a message from themessage list, the unit stops messageKey Operation{^} or {V} Adjust the receiver orspeaker volume(during playback){1} or {<} Repeat message(during playback) *1{2} or {>} Skip message(during playback) *2{3} Enter the“Settings” menu{4} Play new messages{5} Play all messages{6} Play greetingmessage{7}{6} Record greetingmessage{8} Turn answeringsystem on1 Pause message *3{9} or O Stop recordingStop playback{0} Turn answeringsystem off{*}{4}*4 Erase currentlyplaying message{*}{5} Erase all messages{*}{6} Reset to a pre-recorded greetingmessageTG7511_7521BX(e).book Page 39 Tuesday, June 15, 2010 2:10 PM