Pause (for PBX/long distance serviceusers)A pause is sometimes required whenmaking calls using a PBX or longdistance service. When storing a callingcard access number and/or PIN in thephonebook, a pause is also needed(page 28).Example: If you need to dial the lineaccess number “9” when making outsidecalls with a PBX:1 9 a MPAUSEN2 Dial the phone number. a M NNote:R A 3 second pause is inserted eachtime MPAUSEN is pressed. Repeat asneeded to create longer pauses.Answering callsWhen a call is being received, the ringerindicator flashes rapidly.1 Lift the handset and press M N orM N when the unit rings.R To answer a cellular call, you canalso press MCELLN.R You can also answer the call bypressing any dial key from 0 to9, *, or #. (Any key answerfeature)2 When you finish talking, pressMOFFN or place the handset on thebase unit or charger.Auto talkYou can answer calls simply by liftingthe handset off the base unit or charger.You do not need to press M N. To turnthis feature on, see page 34.Adjusting the handset ringer volumen While the handset is ringing for anincoming call:Press MDN or MCN repeatedly to selectthe desired volume.n Programming the volumebeforehand:1 To change the cellular lineringer volume:For CELL 1:MMENUN#6281For CELL 2:MMENUN#6282To change the landline ringervolume:MMENUN#1602 MbN: Select the desired volume.3 MSAVEN a MOFFNTemporary handset ringer offWhile the handset is ringing for a call,you can turn the ringer off temporarily bypressing M N.Adjusting the base unit ringer volumen While the base unit is ringing for anincoming call:Press MjN or MkN repeatedly toselect the desired volume.R To turn the ringer off, press andhold MkN until the unit beeps.n Programming the volumebeforehand:1 To change the cellular lineringer volume:For CELL 1:MMENUN#*6281For CELL 2:MMENUN#*6282To change the landline ringervolume:MMENUN#*16022Making/Answering CallsTG765xAZ(en)_1215_ver001-2.pdf 22 2011/12/15 14:29:33