IntercomIntercom calls can be made betweenhandsets.Note:R If you receive an outside call whiletalking on the intercom, you hear 2tones. To answer the call, pressMOFFN, then press M N.R When paging the handset, the pagedhandset beeps for 1 minute.Making an intercom call1 MMENUN a MINTN2 MbN: Select the desired unit. aMSELECTNR To stop paging, press MOFFN.3 When you finish talking, pressMOFFN.Answering an intercom call1 Press M N to answer the page.2 When you finish talking, pressMOFFN.Handset locatorYou can locate a misplaced handset bypaging it.1 Base unit:Press MLOCATORN.R All registered handsets beep for 1minute.2 To stop paging:Base unit:Press MLOCATORN.Handset:Press MOFFN.Transferring calls,conference callsOutside calls can be transferred or aconference call with an outside party canbe made between 2 handsets.1 During an outside call, press MINTNto put the call on hold.2 MbN: Select the desired unit. aMSELECTN3 Wait for the paged party to answer.R If the paged party does notanswer, press M N to return tothe outside call.4 To complete the transfer:Press MOFFN.R The outside call is being routed tothe destination unit.To establish a conference call:MMENUN a MbN: “Conference”a MSELECTNR To leave the conference, pressMOFFN. The other 2 parties cancontinue the conversation.R To put the outside call on hold:MMENUN a MbN: “Hold” aMSELECTNTo resume the conference:MMENUN a MbN: “Conference”a MSELECTNAnswering a transferred callPress M N to answer the page.56Intercom/LocatorTG765xAZ(en)_1215_ver001-2.pdf 56 2011/12/15 14:29:35