Changing the handset nameEach handset can be given acustomised name (“Bob”, “Kitchen”,etc.). This is useful when you makeintercom calls between handsets. Youcan also select whether or not thehandset name is displayed in standbymode. The default setting is “No”. If youselect “Yes” without entering anyhandset name, “Handset 1” to“Handset 6” is displayed.1 MMENUN#1042 Enter the desired name (max. 10characters; see the character table,page 26).R If not required, go to step 3.3 MSAVEN4 MbN: Select the desired setting. aMSELECTN 2 times5 MOFFNIncoming call barring (CallerID subscribers only)This feature allows the unit to reject callswhen:– the unit receives a call from a phonenumber stored in the call barred list asunwanted (“Storing unwanted callers”,page 37).– the unit receives a call without phonenumber (“Call barring incoming callswithout phone number”, page 37).When a call is received, the unit rings fora short time while the caller is beingidentified. If the phone number matchesan entry in the call barred list:– cellular calls are rejected.– landline calls are disconnected afterthe unit first sends out a busy tone tothe caller.Important:R When the unit receives a call from anumber that is stored in the callbarred list or a call without arecognised phone number, the call islogged in the caller list (page 42)with after the call is disconnected.Storing unwanted callersYou can store up to 30 phone numbersin the call barred list.Important:R You must store the phone numberwith an area code in the call barredlist.n From the caller list:1 MFN CID2 MbN: Select the entry to be barred.3 MSAVEN4 MbN: “Caller barred” aMSELECTN5 MbN: “Yes” a MSELECTN6 Edit the phone number ifnecessary (24 digits max.).7 MSAVEN a MOFFNn By entering phone numbers:1 MMENUN#217 a MADDN2 Enter the phone number (24digits max.).R To erase a digit, pressMCLEARN.3 MSAVEN a MOFFNCall barring incoming calls withoutphone numberYou can reject a call when no phonenumber is provided, such as a call justshowing “Out of area”.1 MMENUN#2402 MbN: Select the desired setting. aMSAVEN a MOFFN37ProgrammingTG765xAZ(en)_1215_ver001-2.pdf 37 2011/12/15 14:29:34