Panasonic KX-TG7652AZ Operating Instructions Manual

Also see for KX-TG7652AZ: Operating instructions

Contents

Panasonic KX-TG7652AZ Operating Instructions Manual Manual pdf 58 page image

Status MeaningOff The power is off. (ACadaptor is not connectedproperly.)indicatorStatus MeaningGreen(On)Signal strength of thebase unit is strong.Amber(On)Signal strength of thebase unit is weak.Red(On)Out of base unit range.Off R The unit is not beingused.R The power is off.Installation1 Connect the unit.R Use only the supplied PanasonicAC adaptor PQLV219AL.Press plug firmly.Hook(220-240 V AC, 50/60 Hz)R When the unit is turned on, theindicator and indicator lightamber for about 2 seconds.2 Confirm that the indicator andindicator light green. (The unitis ready for use.)R If the indicators do not light green,re-position the unit in a placewhere the indicators light green.Note:R The AC adaptor must remainconnected at all times. (It is normal forthe adaptor to feel warm during use.)R The AC adaptor should be connectedto a vertically oriented orfloor-mounted AC outlet. Do notconnect the AC adaptor to aceiling-mounted AC outlet, as theweight of the adaptor may cause it tobecome disconnected.R The unit can support a maximum of 3handsets at a time.Setting the repeater modeThis repeater is pre-registered to thebase unit and the default setting ofrepeater mode is “On”. You do not needto change this setting for initial use.1 MMENUN #1382 MbN: Select the desired setting. aMSAVEN a MOFFNNote:R After turning the repeater mode on oroff, is displayed on the handsetmomentarily. This is normal and thehandset can be used once isdisplayed.Wall mountingNote:R Make sure that the wall and the fixingmethod are strong enough to supportthe weight of the unit.37 mm(Not supplied)Screws58DECT repeaterTG765xAZ(en)_1215_ver001-2.pdf 58 2011/12/15 14:29:35